H-Frame & T-Brace Kit for 222XP40 Antennas in a 8 Bay Array

FEATURES:

All installations are unique in some way, which means it's OK to preassemble certain hardware, or rearrange the assembly process to meet specific site requirements. A quick review of the assembly notes and drawings should help firm up the appropriate strategy. Please remember to double-check all hardware for tightness BEFORE it becomes inaccessible.

These notes assume an assembled crossboom of adequate dimensions and U-bolts of the same size for attaching H-frame plates. Unless you ordered a COMPLETE M2 ‘H’ FRAME. If you just ordered the vertical booms and specified a crossboom U-bolt size when ordering, some drilling or other fabrication may be necessary. Stainless locknuts or nuts and lockwashers are supplied for all kit U-bolts. All other assembly hardware is stainless steel unless otherwise noted. Forged steel parts are galvanized. 

Two containers of zinc paste (Penetrox, Noalox, or equiv.) has been provided to enhance assembly. Apply a thin coat wherever two pieces of aluminum come in contact or any other electrical connections are made. It is also useful on screw and bolt threads as an ANTI SEIZE compound.